Centrix House
Upper Keys Business Village
Keys Park Road
WS12 2HA
01543 458858

STOBER Drives - Automation Drive Technology For Perfectionists

With the broadest range of drive components imaginable, and the highest level of design capability, STOBER should be your first call for uncompromised precision drives solutions.

From unique Modular Systems for Servo (SMS), AC Asynchronous (MGS) and Drive Electronics (SDS/SD6/SI6/SC6), to low backlash, high precision Planetary Gearboxes, Helical Geared units and multi-ratio gearbox design combinations, STOBER’s mechanical power transmissions provide you with all the components, interfaces and functionality you need. Systems meet ATEX, Food and Beverage accreditation standards.

As STOBER has been creating superb drive technology for more than 80 years, you can rest assured that we understand your needs, and the fact that you want the ultimate in drive efficiency and reliability. All backed by a global service network.

Don’t make the wrong choice. Specify STOBER today and you could save time and money tomorrow.

Management Personnel

  • Head of UK Subsidiary: Martin Preece

Products Supplied

Servo Gearheads and Gearboxes:
Full range of Gearbox technologies for Servo, Stepper or AC Motors.
Gearbox Technologies Manufactured - Planetary, Right Angled, Helical Bevel, Worm and Wheel.
Solid Shaft, Hollowbore or Hollowbore with Shrinkdisc
ATEX, Stainless Steel and Wash Down variants.
Synchronous Servo Geared Motors:
With the wide selection of right-angle, inline and offset geared motors synchronous servo geared motors offer the best choice for application-optimized servo axes. Highly dynamic and compact drive unit consisting of an EZ motor and a gear unit.
Servo Geared Motors for 3rd Party Drives:
Servo Motors configured for 3rd party drive manufacturers including Siemens, Kollmorgen, Control Techniques, Beckhoff, Bosch and B&R.
Hollow Shaft Motors:
EZHD are extremely short hollow shaft Motors and include a large internal bore of upto 45 mm. This dimension allows for reliable feeding of power cables, hydraulic hoses, pneumatic pipes, or maybe drive shafts etc.
Lean Motors:
Our LeanMotor offers you a world first. The new motor class is significantly lighter and smaller than an asynchronous motor with the same output. You benefit from the following:
- Up to 96% efficiency, IE5.
- Higher acceleration ability than asynchronous motors
- Lower space requirement in your machine
- Dynamic regulation of speed and torque at lower speeds and when stalling without an encoder
- Low energy consumption and a long service life
Ballscrew Motors:
EZM/EZS are compact Servo Motors for the direct driving of ballscrews. EZM a hollowbore motor that accepts DIN standard ballscrews of up to 32mm dia. EZS a motor with Shrinkdisc to clamp directly to a ballscrew shaft without couplings or additional bearings.
Servo Drives / Amplifiers:
Programmable Power Electronics for Servo Motors. Fieldbus capabilities include CANopen, PROFIBUS, PROFINET, EtherCAT. Current ratings of 1.5A to 80 Amps.
SD6 Safety Servo Drives
High performance and flexibility. Perfect precision control of servo axes equipped with encoders EnDat® 2.2 digital (optional on EZ synchronous servo geared motors). Allows about 33 million positions per revolution to be determined. Best control performance with 32-bit Dual-Core processor. STO, SS1 (SIL 3, PL e, category 4)
SI6 Drive Controllers:
Drive control in multi-axis drive systems. Positioning accuracy (up to 37 bit) in conjunction with Heidenhain encoders EnDat(R) 2.2 digital or HIPERFACE(R) DSL (up to 32 bit) from SICK Stegmann. More than 33 million positions are recorded per revolution. Simply assembly on the standard busbar 5 x 12 mm with Quick DC-Link. Electronic motor rating plate thanks to encoder systems HIPERFACE(R) DSL and EnDat(R) 2.2 digital. Safety: STO (”Safe Torque Off”) controlled via terminals or via Fail Safe over EtherCAT(R) (FSoE). Communication via Ethernet-based fieldbus systems such as EtherCAT(R) and PROFINET(R). Determination of the fieldbus communication by the firmware. CIA 402 device profile for seamless integration in Controller Based and Drive Based Solutions.
SC6 Drive Controllers:
Our more compact version for the encoderless Lean motor. The compact stand-alone SC6 drive controller allows for sensorless control of STOBER LM series Lean motors. These motors provide energy efficiency at the performance level of a synchronous servo motor. They also guarantee high investment protection, thanks to energy efficiency class IE5 and the corresponding higher efficiency compared to IE4 asynchronous motors. However, the SC6 can also be used in combination with asynchronous motors or synchronous servo motors with encoders (e.g. the STOBER EZ series). The SC6 drive controller is available in three sizes up to 19 A: sizes 0 and 1 as a double-axis controller, size 2 as a single-axis controller. Various safety options are also available.
Motion Controllers:
MC6 MultiAxis Controller - CODESYS programming environment with CNC functionality, via EtherCAT. Cabinet or Touchscreen variants. Control of up to 100 Axes possible.
Software for Motion Controllers:
AS6 AutomationControlSuite
The AS6 AutomationControlSuite development environment covers all functions included in CODESYS V3 for Motion Control (PLCopen, DIN 66025) and for PLCs (Programmable Logic Controllers) (IEC 61131-3). High performance Drive&Motion libraries are available for creating programs. Furthermore the convenient quick start-up was the focus - without programing effort and within a few minutes.
Overseas Reps

Overseas representation

STÖBER Antriebstechnik
UK Reps

Companies represented in the UK

STÖBER Antriebstechnik:
Worldwide Sales and Service network to support STOBER Products and Solutions.
STÖBER Antriebstechnik
Worldwide Sales and Service network to support STOBER Products and Solutions.
Trade names

Trade names

  • STÖBER Antriebstechnik

Share this...